One of the biggest challenges that plague homeowners are getting the right screws to use on stucco. Unless you are a professional or a contractor when it comes to understanding which screws will work best for the project, you may be unaware of the differences between the varied screw kinds.
There are many different kinds of screws that can be used in lathing. Since stucco can be applied to virtually anything, it is the substructure that determines what kind of screws one should get. Like most things, there is a wide array of options for one to choose from, which doesn’t necessarily make it easier to settle on one.
In this article, we take a look at the best screws for stucco. Additionally, we will also be answering some basic queries that go along with it in our buyer’s guide section. So, without further ado, let’s get to the review.
Ansen Tools AN-133 Diamond Tip Hex Concrete Screw AnchorIdeal for hard materials
Ansen Tools is a well-known brand that specializes in construction equipment. All their products are ICC listed, which ensures that customers get a quality product every time.
These screws are made from hardened carbon-steel that utilizes an advanced plating process. It also has a diamond tip, which ensures that it can drill easily into most hard materials. The box contains 100 units with a carbide dipped drilled bit.
These screws provide a lifetime corrosion resistance, which should assuage your worries regarding the screws coming undone due to rust. This is possible thanks to its advanced Envirocoat plating. These penetrate into extra hard materials like concrete, bricks, wood, etc.
One issue that comes up every now and again has to do with its flat heads that make it hard to screw them. This problem can be alleviated when using a drill. These screws are the professionals’ first choice and come highly recommended.
Everyone is aware of the ingenuity of Philips products. Here too, we have an amazing set of screws that work like a charm on stucco.
The trademark Red Seal of this product ensures that it creates a moisture barrier that is impossible to penetrate. Additionally, it has a diamond tip that drives without any effort into a pre-drilled hole.
These screws are made for outside applications. The anchors are used chiefly for electrical boxes or installation of hose reels. These also work amazingly well when installing TV mounts outside. The screws are designed to work on concrete pads, stucco, and electrical boxes.
Those who are worried about water seeping into the screw holes will benefit from its Red Seal and Angel Wings that sit under the head of the screw. These clear the debris from the hole while the screw is being drilled. Its patented drive system allows you to install the screws with one hand without any wobble.
The screw shaft may be bigger than the drill bit. This problem can be solved by getting a wider drill bit. Philips, on the whole, has maintained its reputation with this product and provides for the needs of various households looking to drill screws for various purposes.
Chenango Supply Hex Head Concrete Screw AnchorStrong and Durable
Those who are into the construction business would know the renown of the Chenango supply and the high-quality products they have to offer. In this set, customers get 100 units of screws with a drill bit.
These screws are ideal for screwing into concrete. They are mostly employed to anchor signs and metal fixtures to concrete slabs. They are safe to use both outside and inside, thanks to their water-resistant properties.
The screws have a 1000-hour salt spray test coating, which is a testament to their durability and corrosion-free properties. They are Miami-Dade compliant, which certifies their quality, making them highly reliable screws.
The screws are incredibly strong and durable and can hold up several hundred pounds. This allows them to pierce into most strong materials like concrete and remain there for long years.
They may be susceptible to damage if a lot of torque is used to drive them in. Other than this minor issue, we would highly recommend these screws to be used for concrete and other materials.
MKT Steel Conset Masonry Screw AnchorValue for Money
MKT is one of the heavyweights in the construction industry and for a good reason too. This product is the epitome of their quality and ingenious design.
These screws work well with all types of masonry, wood, and stone and can be used outside just as well as inside. They are also fairly easily installed on softer base materials too though undersized bits are required to get the best results.
Design and Performance
The screws are made of high strength steel, which makes them ideal for screwing into hard materials. They also have a fluorocarbon coating on them that makes them resistant to corrosion and have withstood the 1000-hour salt spray test. The screws drive into the toughest of construction materials with no breaks.
The drill bit that is included in the box is not of optimum quality though one can be procured with ease. This product is highly recommended for those who are looking for screws to rely upon for several years. They are also quite cheap compared to other products.
SNUG Fasteners Flat Head Philips Diamond Tip Concrete ScrewBest penetration prowess
As the penultimate product of our review, we have a top-quality product by SNUG Fasteners. The package includes 100 screws and a masonry drill bit.
These screws are perfect for anchoring items onto various materials, including concrete, brick, block, and other masonry materials. They can be used indoors just as well as outdoors since they do not rust easily.
Design and Performance
The screws are long-lasting, which is possible due to their corrosion-free property. This is due thanks to their Envirocoat blue coating that makes them immune to rusting. They also have deep threads that provide for superior holding strength. The diamond tip of each screw enables it to penetrate easily into hard materials so users won’t have to worry about the screws not being compatible with the materials.
The drill bit is not of exceptional quality and may come undone after a few holes. Nevertheless, the product, on the whole, is quite impressive and is highly recommended for users who are looking for reliable and sturdy screws to anchor fixtures.
ITW Brands Steel Phillips Stucco AnchorEase of Use
Lastly, we have a highly reliable and strong product by ITW Brands. These screws are exceptionally strong and can take multiple pounds in weight when anchored.
If you are looking to anchor fixtures outside and require screws that do not rust easily, then this product can get the job done with ease. These are specially designed to penetrate cement stucco and other harder materials.
Performance and Design
The screws are made with hardened steel, which makes them supremely strong and durable. Their round heads make it quite easy to drive them in which is a plus point for those who have never screwed anchors into walls before. Furthermore, they can take quite a bit of weight when fastened and can last for many years.
When driving them in, if a lot of torque is used, the screws may begin to disintegrate. As long as you are aware of how much torque is needed to work them in, you shouldn’t have any problems. Various professionals highly recommend the product.
Best Screws for Stucco – Buyer’s Guide/FAQs
Can you put screws into stucco?
Do you need a special drill bit for stucco?
Best Screws for Stucco – Final Word
And don’t forget to check our list of useful tools and gadgets for any workshop!