Do you know how to install laminate flooring? No matter if you are a pro or just a beginner in installing laminate flooring, you would certainly have to cut it as per the measurement of your house.
This is one of the essential parts of the laminate flooring installation. You can do this with the help of a laminate floor cutter with the best blade. Using a saw for cutting laminate flooring is no rocket science; you don’t need any professional knowledge or skills for it.
The market is full of a wide variety of saw blades for cutting laminate flooring. This makes it quite tricky to choose the best one for yourself. By selecting the right saw blade, your work will become very simple and quick. Plus, you can cut the laminate floor within seconds.
We have got you covered when it comes to picking the ideal saw blade for your requirements. I’ve made Best Saw Blade for Laminate Flooring Review. Here is listed the 5 best saw blades available on the market with their features, pros, and cons.
Freud Ultimate (LU80R010)Most durable saw blade
This Freud saw blade comes with the same coating as the previous Freud saw blade mentioned in this review. The coating of this blade makes it rust resistant without impacting its finish and strength.
Design and materials
The blade is made of high-quality TiCo high-density carbide material that enables easy crosscutting for enhanced performance. The saw blade has 80 teeth, which is twice the other Freud blade mentioned in this review.
However, the ATB teeth of this saw blade can wear down or break if it’s used with harder materials. This blade features a High Alternate Top Bevel Tooth design that results in cuts free of splinters, which will not make it messy while you cut your laminate flooring.
The Freud Ultimate saw blade provides clean and smooth cuts without splintering or chipping. The 80 teeth present in the blade provide efficient cuts. It has a laser-cut anti-vibration slot that reduces unnecessary movement and vibration.
This ensures smooth and precise cuts and expands the life of the blade. Moreover, the perma-shield non-stick cover reduces blade drag as well as protects it from corrosion and pitch buildup.
This saw blade is a bit expensive as compared to other blades. However, its long durability makes up for its price.
The Freud Ultimate blade with 80 teeth is designed for cutting laminates and woods. Plus, it also works on veneers and marine-grade products. This saw blade is comparatively stronger than other saw blades on this list and will last longer.
It is PREMIUM Choice of our Best Saw Blade for Laminate Flooring Review.
Bosch DCB1072 Daredevil Saw BladeBest miter saw blade
The Bosch DCB1072 Daredevil Saw Blade is 10 inches in size. Its size makes it a perfect saw blade for cutting laminate countertops as well as floors. It features a unique negative hook angle that diminishes all types of chipping.
Design and materials
The Bosch saw blade is made of extra hard steel with a brute carbide design. This makes it exceptionally strong and provides a long life to the blade. The brute carbide micro grain formula of this blade augments impact resistance and durability.
The saw blade has a triple chin grind design, which enables it to deliver high-quality performance with a maximum of 6000 RPM. The blade has 72 teeth with a Speed Coat finish, which reduces vibration and friction. Moreover, the big expansion slots in the blade prevent warping while the control cut shoulders and body slots reduce heat and kickback.
The Bosch saw blade is offered at a fair price as compared to other saw blades out there. It lasts for a long time as well, which further saves your money since you don’t have to buy a new saw blade now and then.
This saw blade offered by Bosch is the ideal circular saw blade for cutting laminate floors and countertops owing to its extra thin kerf, which results in minimum waste and quick cutting. The Speed Coat finish and triple chip design make it one of the best laminate flooring miters saw blades out there.
This circular saw blade is recommended for all those people who want to cut laminate countertops or who want a jigsaw blade for cutting laminate flooring. It is in TOP 3 of our Best Saw Blade for Laminate Flooring Review.
Makita A-93681 Mitersaw BladeBest saw blade for the Money
Makita is a famous brand in the power tool business. It manufactures one of the best miter blades. The brand makes a wide assortment of blades, including specialized wood cutting blades for laminate, hardwood, softwood, and plywood.
Makita A-93681 Mitersaw Blade is the best saw blade for the money. It gives fantastic value for your money. Don’t go by the small size of this blade since it surpasses its size when it comes to its cutting capability.
Design and materials
Makita saw blade is not made of very strong materials. The blade is constructed using steel. Its many cutting teeth save time while cutting. This 10-inch blade is welded with ultra-thin kerf carbide tipped design, which minimizes wastage of the laminate.
This saw blade is exceptionally functional. It gives a precise cut to the laminate flooring. It makes use of Deep and Exact Cutting Technology (DKT), which results in an improved performance and cutting capacity. Finally, it enhances the cutting power of the blade. This saw blade is easy to use and great for crosscutting.
The saw blade is available in reasonable price and provides the best value for money. The affordable price of the blade makes it a customer favorite.
Even though the Makita Mitersaw Blade is not very durable and is not made of durable material, still it does a pretty good job in cutting laminate flooring. It is a budget pick and is excellent for small laminate floor cutting jobs.
As the name suggests, this blade is fully compatible with Makita miter saws. The steel components in the blade help in cutting. The blade is recommended for DIY.
Freud Next Generation Premier Fusion Saw Blade (P410)Best saw blade for general purpose
This is a new saw blade offered by Freud that is best for general purpose. This full kerf blade comes with the branding of the Next Generation.
Even though the model number is the same as the previous saw blade by Freud, the branding and new improvements to this one has given it that extra edge. This 10-inch blade has 40 teeth with a hook angle of 18 degrees and an arbor hole of 5/8″.
Design and materials
Freud Next Generation Premier Fusion Saw Blade comes with a Trio tooth design with a unique grind for the top, face, and sides of every tooth. The blade is equipped with a loft angle of 30 degrees ATB grind at each tooth’s crown, an axial shear face grind on the face of every tooth, and a dual bevel or double-sided grind at its every side.
The teeth of this blade are made of TiCo high-density carbide alloy with a red Perma-Shield blade coating, which diminishes friction, corrosion, pitch buildup, and blade drag.
The blade has a lofty angle ATB grind that cleanly cuts all materials, which includes melamine and plywood materials that particularly tend to tear out. The double side or dual bevel grind in the blade delivers a polished exterior with a smoothness that is better than the one from 220 grit sandpaper.
Moreover, the axial shear face grind significantly improves the feed rate by a maximum of 30% and diminishes power draw by a maximum of 35%. It has a cutting capacity of 3/8 inch to 3-1/2 inch in crosscuts and 3/4 inch to 1-1/2 inch in rip cuts.
The Freud Next Generation saw blade has the same price as the previous model of Premier Fusion saw blades. This means you can get all the new upgrades of this blade in the same old pricing.
The Freud Next Generation Saw Blade has a radical tooth geometry, which results in an incredibly polished and smooth surface finish with minimal resistance or friction. Moreover, the laser-cut vibration slots in the blade extend its life as well as diminish sideways movement that could result in splinters.
The blade provides clean and smooth crosscuts and rips cuts in laminates, softwoods, hardwoods, thick lumber, melamine, and plywood. This saw blade is recommended for all general cutting purposes.
Even though this means there would be lesser blade changes but if you go for dedicated specialty material, rip cutting, or crosscutting blades, you can get better performance. Woodworkers can use this blade in table saws, miter saws, and radial arm saws.
DEWALT DW3106P5D60I Series 20 Saw BladeBest saw blade for crosscutting
DeWalt is a famous brand for several woodworking tools, particularly power hand tools. The brand produces a wide range of high-quality tool accessories like this saw blade. The DeWalt Series 20 saw blade is thinner and more delicate than other saw blades on this list.
This blade is best for cutting laminate flooring, sturdy wood, softwood, plyboard, or chipboard while using a miter saw, or table saw. It comes in the packaging of two models with the same size so that you can put one in your table saw and another in your miter saw.
Design and materials
The blade has a standard size of 10 inches with 60 individual thin kerf teeth that are evenly spaced around the edges. This ensures that the saw delivers clean, smooth, and error-free cuts.
The teeth have carbide tips and a unique design of wedge shoulder, which provides a tiny shoulder at the back of every tooth. This lets you make heavy cuts on hardwoods with its tolerance and edge.
Since the manufacturer of this blade uses computers to make the perfect balance plate of this blade, it provides smooth cuts with minimum vibration. This allows you to make precise crosscuts with minimal material wastage.
The unique wedge shoulder design puts more power behind the teeth during cutting, which results in smoother and finished cuts without any chipping and splintering along the edges.
The professional quality thin kerf of this blade provides a smooth finish with minimal material wastage.
The DeWalt DW3106P5D60I saw blade saves your money since you can use this blade with both table and miter saw as per your requirements.
The DeWalt Series 20 saw blade offers unique flexibility since you can use it with a table saw as well as a miter saw. This means you don’t have to purchase a separate blade for each saw if you own both these tools.
Moreover, the blade is versatile as it’s packed with features that let you quickly cut across laminates, chipboards, plywood, softwoods, and hardwoods.
The durability, tolerance, and high-performance features of this blade make this efficient and affordable saw blade every woodworker’s dream. This saw blade is recommended for people who want to use it for different cutting applications.
We put added it in TOP 3 of our Best Saw Blade for Laminate Flooring Review.
Best Saw Blade for Laminate Flooring Review Buyer’s Guide
Best Saw Blade for Laminate Flooring Review – Contents:
In what type of saw can I use my saw blade?
You can use your saw blade according to its design. A few blades can be used in particular saws, like table saws and miter saws, and others can be used in all types of saws. Nevertheless, you must ensure that you use the right blade type for your saw to get great results and work safely.
How many teeth should a saw blade have?
Preferably, saw blades that have more teeth make smoother and finer cuts as compared to the ones that have fewer teeth. Nevertheless, blades with more teeth work slower while cutting.
What is the gullet in a saw blade?
The gullet is the space in front of every tool, which helps in removing the chip. While ripping, the chip size is larger, and the feed rate is quicker. Therefore, the gullet must be sufficiently deep so that it can handle a huge amount of material.
What is ATB (Alternate Top Bevel) in a saw blade?
This refers to the alternate blade teeth bevel between right and left hand. This blade tooth configuration results in smooth cuts. The alternate beveled teeth form an edge like a knife on both blade sides and result in cleaner cuts.
What is Triple Chip Grind (TCG) in a saw blade?
This blade tooth configuration is best for cutting hard materials like laminates, plastics, and MDF. These teeth alternate between a higher ‘trapeze’ tooth and a flat ‘raking’ tooth. This tooth configuration is also used for non-ferrous blades that cut metals.
Can you cut other types of wood from saw blades apart from laminate flooring?
A saw blade can easily as well as quickly cut through different types of woods, including laminate flooring. This means that you can cut any wood with the help of a high-quality blade, including both harder as well as softer woods.
Saw blades can also cut composite woods. Apart from laminate flooring, saw blades can get through MDF, veneer counter tops, plywood, floorboards, plasterboard, decking boards, and drywall.
What are saw blades made from?
Saw blades are made from steel. To be more precise, these blades are made from steel with tungsten carbide tips (TCT). This means that the blade’s teeth have been treated and hardened for enhanced durability. A few saw blades are also made using high-speed steel (HSS).
Best Saw Blade for Laminate Flooring Review Conclusion
You can purchase any of these saw blades as all of them do a great job. With all the features, pros, and cons of the best saw blades within one article, you can make the best decision quickly.
Plus, with the buying guide, you can make the right selection of saw blade for your laminate floor cutting project.
You can go for Freud’s new Premier Fusion Blade if you want to cut a variety of materials and if you don’t want to change the blade in your saw frequently. Freud’s Next Generation blade is a general-purpose blade.
You can opt for DEWALT DW3106P5D60I Blade if you want to crosscut your laminate flooring.
Makita A-93681 Mitersaw Blade provides the best value for money and can fit into miter saws.
If you are looking for the best miter saw blade, then Bosch DCB1072 Daredevil Saw Blade is the way to go.
And, if you’re more concerned about the long life of a saw blade, then you must undoubtedly choose Freud Ultimate (LU80R010).
You must invest time when buying the best saw blade so that you can easily and quickly cut your laminate flooring without any hassles.